1700 Degree Industrial Muffle Furnace

1700 Degree Industrial Muffle Furnace

July 28, 2024

 

Specification:-

Contact: 91 9821427734

Type

Benchtop

Furnace Structure

Chamber Material, Temperature Controller System, Heating Element, Furnace Shell And Other Assistant Parts

Max Temperature

1700℃

Continue Operating Temp.

1600℃

Heating Element

High Quality Molybdenum Disilicide (MoSi2 ) heater 

Chamber Material

High Temperature1800 Grade Ceramic Fiber Material

Temperature Accuracy

±1℃

Thermocouple

B Type

Temperature Controller

  • PID automatic control via SSR power control with phase angle fired, current limiting resistor.
  • 1 programmable x 16 segments for precise control of heating rate, cooling rate and dwell time.
  • Built in PID Auto-Tune function with overheating & broken thermocouple broken protection for this Muffle Furnace 1400 type.
  • Over temperature protection and alarm allows for operation without attendant.

Electronic Component

Autonics / Schneider / L&T Electronics Brands

Heating Rate

≤ 15℃/Min (Suggest 10℃/Min For Longer Life Using of Furnace)

Safety Protection

Overheat And Thermocouple-Break Alarm

Certification

 NSIC REGD, ISO 9001 – 2015/14001-2015/13485-2016/FDA/ GMP/CE CERTIFIED

Furnace Shell

High Quality GI Sheet With PP Powder Coated

Insulation

High Quality Ceramic Fiber Zirconia Grade Thermal Insulation Material To Ensure A Good Uniformity

Accessories

One Pair of High Temperature Furnace Gloves

One No of Crucible and Tong and Operational Manual

 

Using Attentions

  • The cooling rate for this Muffle Furnace 1700 type shall also not exceed 10℃ /min.
  • Toxic or explosive gases are not recommended for use with this furnace without necessary safety controls and supervision.
  • Small cracks may appear on the surface of the refractory ceramics over extended use.   
  • This is a normal occurrence and the cracks may be repaired with alumina coating.

Refractory door block must be inserted before closing door.

Warranty

  • One-year limited warranty for this Muffle Furnace 1700 type with lifetime support. (Consumable parts such as heating elements and Sensor, crucibles are not covered by the warranty, please order the replacement at related products)

ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of One Year Limited Warranty.

Leave a Reply

Related Products

You Might Like Also

1700°C High Temp Furnace

Application:- 1700°C High Temp Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment For Industrial Colleges, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Read More

FUME HOOD

FUME HOOD APPLICATIONS The core application of a fume hood is fume removal also minimizing nuisance odors. It is used in laboratory where some important tasks are preformed such as solvent mixing, soldering and working with volatile organics, powder and flammable chemicals, different types of acids and low odor thresholds etc. and all these tasks Read More

Vacuum Ovem

Vacuum Oven is used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry steriliza Read More

Tube Furnace

Application:- 1700°C High Temp. Tube Furnace Mainly Provides High Temperature Heat Treatment Environment for Industrial, Research Institutes, Factories and Other Industrial Laboratories, and Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, and Semiconductor Materials. Read More

Tube Furnace

Application:- 1200°C Tube Furnace (Programmable) is Mainly Provides High Temperature Heat Treatment Environment for Industrial, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Read More

1800 Degree Muffle Furnace

Application:- 1800°C High Temp Muffle Furnace (Box Type Resistance Furnace) Mainly Provides High Temperature Heat Treatment Environment For Industrial Colleges, Research Institutes, Factories And Other Industrial Laboratories, And Is Applied To New Materials Such As Metal Materials, Ceramic Materials, Nano Materials, And Semiconductor Materials. Read More