Roof Sheet Machine

Roof Sheet Machine

June 15, 2022

Roof Sheet Machine is excellent choice when reliable, flexible and high quality roof sheet profile is wanted. The product range covers trapezoidal and corrugated profiles for every domestic and industrial need. The Sheet weight is up to 1220 to 1450 mm and the output capacity of the line is always scaled to fit the needed volume. Roof Sheet roll forming machine is a good choice if you want to reach the maximum production capacity for one profile type only. With this type of Roofing Sheet Roll Forming machine you can produce fast and easily high-quality roofing and cladding profiles.

  • D coiler 5 ton cap.
  • Entry Gate with
  • Roll Forming Line with 18 stations, 10 H.P. electrical.
  • Control Panel semi auto
  • Cutting Unit (Hydro.)

Technical Specifications

  • Maximum sheet width that can be formed : 1450 mm
  • Maximum sheet thickness in PPGL/PPGI/NCGI Strips that can be formed : 0.2 mm to 0.8 mm
  • Horizontal distance between shafts : 500mm
  • Number of forming stations: 22 nos.
  • Total HP for Line : 15
  • Speed of the machine : 0 To 20 mtr / minute
  • Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

  • Coil weight : 5 MT Max
  • Coil width : 1450 MM
  • Coil bore : 450 MM min, 510 MM max dia.
  • Mandrel movement : Manually adjusted
  • Back Tension : Manually adjusted

Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts

The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.


The drive to the roll former will be by means of a chain. The main drive will be provided by means of 10 HP motor


One set of Tooling with EN grade will be from imported material suitable for your machine as standard supply. The same is involved in operations like rough machining, keyway, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro)

Hydraulically operated power pack along with cutting die with 3 HP electrical.

Leave a Reply


March 29, 2024

Looking to stay ahead of fluctuating gas prices? Turn to The Gas Prices for real-time updates and cost-saving tips! At, you'll find a comprehensive resource to help you navigate fuel costs and make informed decisions at the pump. Whether you're planning a road trip or simply trying to save on your daily commute, The Gas Prices has you covered.

Related Products

You Might Like Also

False Ceiling Channel Machine

Manufacturers of False Ceiling Section Machine, Ultra Ceiling Section Roll Forming Machine, False Ceiling Machine, Pop Channel Patti Machine, Pop Bottom Patti Machine. Pop Main Channel Machine, Furring Channel Machine, Metal Furring Channel Roll Forming Machine, Gypsum Channel Roll Forming Machine. Read More

Gypsum Channel Machine

Manufacturers & Exporter of Gypsum Ultra Ceiling Channel Machine, Pop Channel Machine, False Ceiling Roll Forming Machine, Ultra Ceiling Section Machine, Gypsum Perimeter Roll Forming Machine, Intermediate Channel Making Machine, Pop Bottom Patti Machine, Furring Channel Roll Forming Machine, False Ceiling Section Roll Forming Machine, Ultra Channel Roll Forming Machine In Rajkot-India. Read More

Pop Channel Machine

The Pop Channel Making Machine can Manufacturing a various kinds of Section Like Furring Channel, Pop ultra Channel, False Ultra Ceiling Channel, Wall Angle, Pop Main Channel, False Ceiling Section, Intermediate Channel, Ceiling Angle, Gypsum Perimeter Section, Metal Stud and Cross Section Profile to satisfy customers� required. Read More

Roofing Sheet Making Machine

We provide you the fully automatic Roofing Sheet Making Machine with punching of Roof Sheet in the various models and Forming sizes. Our manufacturer is one of the earliest one in India to develop the main Roof Sheet machines. So we have ability to design custom Roof Sheet Machine according to customer sample or profile drawings. Read More